SPONSORED

Details of a Standard Cuplock System Scaffold


SPONSORED

The need of system scaffolds in the construction industry for carrying out demolition, maintenance and repair work is obvious. One of the best staging structure being used in Australia is the Cuplock System, which relies on securing nodes with two cups rather than with wedges, nuts and bolts. It provides a fast, multifarious and streamlined system of commissioning projects related to this field of work. It offers a fast solution for securing up to four horizontals at a time through a reliable top cup that makes the joint firm and stiff.

This type of structure is easy to erect and dismantle, does not leave any loose ends, requires minimal maintenance and uses no components like nuts, bolts and wedges. It is best for access or formwork support and has high load bearing capacities despite being quite lightweight. The variegated components of Cuplock system scaffolding are listed below:

1. Standard / Vertical Cuplock

It has cup joints at regular distances; the captive mobile top cups are suitable for facing the adverse condition of site. Internal spigots link standards (placed on top) in vertical direction.

2. Ledger / Horizontal Cuplock

It has forged steel blade at the ends, which are able to find the bottom cups of the standard while being fastened by the associated top cups.

3. Cuplock Transom

Each piece is manufactured from twin structural angles that are linked to each other on the back, with drop forged blades being placed at the ends.

4. Cuplock Omega Transom

This product is fabricated from press bent sections with flange-type extensions on the sides and finds application in supporting the working platform in conjunction with steel battens.

5. Cuplock Intermediate Transom

It is used in instances when distance between the standards is more than the length of the boards.

6. Cuplock Inside Board Transom

7. Cuplock Return Transom

It is used to eliminate gaps between two scaffolds.

8. Ladder Access Transom

Connected to the ledgers in the bay, this component is used to create the desired amount of space in the bay to place a ladder.

9. Cuplock Bracing

10. Cuplock Cantilever Frame

It is equipped with ledger blades that fasten with the cups of standards and acts as a supporting component for decking and formwork at the edges.

11. Beam Brackets

These are affixed to the primary vertical supporting beams, with the purpose of avoiding individual verticals to lend support to slab form work.

12. Hop-Up 1/2/3 Bracket

This type of bracket is created in the omega sections and tubes sections to place battens with facility for forged blades to be fitted with Cuplock standards through a cup joint.

13. Cuplock Bridging Horizontals

These components render the necessary guardrails on the working platform of the scaffold vehicle passage.

14. Universal Jacks

Used in combination with forkheads, socket base and drophead adaptors, these types of screwjacks offers a mode of jacking that can be implemented at the top as well as the bottom of a staging structure.

15. Socket Base

It is drilled in order to insert a securing bolt, if required, when it is used along with the universal jack.

16. Loose Spigot

17. Adaptor

It is a tool that allows dropheads to be easily converted from the waffle, trough or metriform support systems in order to be used with the Cuplock scaffold.


credit




Popular Posts

Share this !